# AI Copilot

AI Copilot helps turn a circuit request into a reviewable design, inspect an existing schematic or PCB, organize functional blocks, generate missing library items, and explain simulation results. It assists the workflow; it does not replace datasheet review, ERC, DRC, DFM, or engineering approval.

## Configure AI access

Nothing to configure. Sign in with a **Pro** or **Max** plan, open **View → AI Copilot Chat** (++ctrl+space++) and start: the AI Copilot runs on **WireFrame AI**, paid from your plan's AI credit, and WireFrame AI picks the model for each task. The top of the panel shows **WireFrame AI** and the credit left; **Preferences → AI Assistant** (or the **⋮** menu of the panel → **AI settings...**) shows the same.

The credit, the plans and what is sent where are on [AI Credit and Your Data](models-and-credits.md).

## Start a focused session

Use the **+** button in the Copilot panel to start a session and the history button to reopen earlier sessions of the project. Describe one goal at a time and include measurable requirements where possible.

Good starting requests include:

- “Design a 12 V to 5 V buck supply for a 1 A load.”
- “Review the USB-C power input and protection block on this schematic.”
- “Explain the failed `VOUT` ripple assertion from the latest simulation.”
- “Group this sheet into power, control, and interface blocks.”

Long sessions are summarized and relevant project facts can be recalled later. Still restate safety-critical values before asking Copilot to modify or verify a design.

### Short video — Start and reopen a Copilot session

<video controls muted playsinline preload="metadata" src="../assets/wf/docs/ai/index/start-and-reopen-a-copilot-session.mp4" title="Start a new session with +, then reopen the NE555 design session from History"></video>
## Design workflow

### Diagram — AI design review workflow

1. Describe the circuit and constraints.
2. Review the research summary.
3. Answer the clarifying questions, or select **Use all suggestions & continue** only when the suggested answers are acceptable.
4. Review BOM components, connections, and functional blocks.
5. Resolve missing symbols, footprints, and pin-count mismatches.
6. Run **Netlist Check**, simulation, and design analysis.
7. Add approved blocks or create the AI project.
8. Inspect the schematic before updating a PCB.

## Component Review tabs

**Design Plan** in the AI Copilot panel opens the **AI Planned BOM & Schematic Review** window — called *Component Review* in this guide. Its status chips at the top summarise the design (parts bound, nets, enclosure, netlist issues, simulation, analysis); the tabs, in order:

| Tab | Use it for |
|---|---|
| **BOM Components** | Check part number, value, package, origin, and library status |
| **Connections Netlist** | Review named connections and pin references |
| **Blocks** | Generate and review functional circuit groups |
| **Board Fit** | Board shape, enclosure, stacks, and whether the BOM fits — see [Enclosure Fit and Multi-Board Products](../advanced/enclosure-and-assembly.md) |
| **System** | Products made of several boards (`.asmxml`): stacking and board-to-board wiring checks |
| **Netlist Check** | Find pin, connectivity, and consistency problems |
| **Simulate & Verify** | Readiness (components, library match, GND, power source, nets) and **Run Simulation** for the proposed design |
| **Design Analysis** | Review design-level findings |
| **Local Pool Settings** | Add library sources and review generated contracts |

### Image — Current Component Review tabs

![The review window: status chips, the tabs, and BOM Components selected](../assets/wf/docs/ai/index/current-component-review-tabs.png)
## Safety and privacy

- A request carries your message and the part of the design it is about (and an attached datasheet's content). It goes to WireFrame AI — see [what is sent, and where](models-and-credits.md#what-is-sent-and-where). Your projects stay on your computer.
- Review every proposed change before applying it.
- Treat generated symbols and footprints as unverified until checked against the datasheet.
- Limit each request to the relevant sheet, block, or signal.
- Re-run deterministic checks after every accepted change.
- Stop and review when part numbers, package variants, ratings, or pinouts are ambiguous.

## Continue learning

- [Copilot Commands](commands.md)
- [AI Credit and Your Data](models-and-credits.md)
- [Datasheets, Repairs and Project Memory](datasheets-and-memory.md)
- [AI Design Agent](design-agent.md)
- [Fix or Create a Component](component-generator.md)
- [Placement and Routing Assistant](auto-placer-router.md)
- [How the agent understands a project](how-the-agent-works.md)
- [What waits for your approval](approvals.md)
- [Review and Simulation Guide](../ai-copilot.md)
- [AI-Assisted Design Tutorial](../tutorial/ai-design.md)
