# AI Design Agent

Use AI Design Agent to research a circuit request, clarify requirements, and prepare a BOM, connection plan, and functional blocks for review.

## Prepare the request

Include:

- input and output voltage;
- maximum current or load;
- interfaces and connector requirements;
- size, package, or assembly constraints;
- environmental or safety constraints;
- preferred or prohibited parts;
- the result you expect from simulation.

Avoid requests such as “make a power supply” without ratings. Copilot can ask questions, but it cannot infer product requirements that have not been decided.

## Research and clarification

After receiving the request, review the research summary (**Module Analysis**) and answer the clarification questions shown under it, one at a time. Use **Next question** and **Back** to move between them; on the last question the button becomes **Start designing**. Use **Use all suggestions & continue** only for exploratory work.

Each question offers one or more choices — the one marked **Suggested** is the Copilot's default — plus an **Or your own answer** field. **Start designing** submits your answers. **Use all suggestions & continue** fills every unanswered question with its suggestion and keeps each one listed as an explicit assumption; it is not an approval of production requirements.

### Image — Clarifying questions

![After the research step the Copilot asks its questions one at a time, with the suggested answer marked](../assets/wf/docs/ai/design-agent/clarifying-questions.png)
## Review BOM components

For each physical component:

1. Confirm the exact part name and value.
2. Confirm the package.
3. Read the role and origin indicator.
4. Resolve **Not in Pool**, partial matches, and pin-count mismatches.
5. Use **Create**, **Import**, or **Manage** on the card — or repair the part in the AI panel with `/fix <refdes> <what is wrong>` (the card shows the exact form).

Left-click a component card, its type tag, or one of its actions to make that item the active preview. The action row changes with library state:

| Component state | Actions | Result |
|---|---|---|
| Found in Pool | **Manage**, **Import** | Open the matched library editors, or replace the assignment from a library file |
| Not in Pool | **Create**, **Import** | Search the published library and otherwise start a new symbol in Symbol Library Editor, or load a library file |

To repair or build a part with AI, type `/fix <refdes> <what is wrong> [file.pdf]` in the AI panel — see [Fix or Create a Component](component-generator.md).

Editing **Value** or **Footprint Package** invalidates derived validation, simulation, and placement results. Let the pool re-check finish, then repeat the relevant review tabs.

An item marked **auto** was added by WireFrame support rules. Keep it only when the design actually needs it.

### Image — BOM component review

![BOM Components for the NE555 blinker — every card with value, package, verification and actions](../assets/wf/docs/ai/design-agent/bom-component-review.png)
## Review connections and netlist checks

Open **Connections Netlist** to inspect named nets and referenced pins. Then open **Netlist Check** and resolve critical findings before placement or simulation.

Pay particular attention to:

- missing or nonexistent pins;
- symbol pin count versus footprint pad count;
- power and ground connectivity;
- single-ended nets that should have more than one connection;
- inconsistent net names.

Use **Fix with AI** only after reading the proposed correction. Re-run the check afterward.

**Fix with AI** appears when critical deterministic findings remain and is limited to three attempts for that review cycle. It sends the listed critical issues back for regeneration; it does not replace ERC.

## Generate functional blocks

Open **Blocks** and select **Generate Blocks**. Review the membership and purpose of each power, protection, control, interface, oscillator, or load block. Use **Send Blocks to Chat** when you want Copilot to discuss or refine them.

### Short video — Generate and review functional blocks

<video controls muted playsinline preload="metadata" src="../assets/wf/docs/ai/design-agent/generate-and-review-functional-blocks.mp4" title="The Blocks tab: power input, NE555 oscillator and LED output, each scoped to its parts"></video>
## Verify before applying

1. Resolve library issues.
2. Run **Netlist Check**.
3. Run **Simulate & Verify** when the circuit is supported.
4. Review **Design Analysis**.
5. Add the approved design or block to the active project.
6. Run schematic ERC after placement.

## Revise the design

Ask for one bounded change at a time, such as:

- “Replace the regulator with a 1 A part in SOIC-8.”
- “Add reverse-polarity protection before the input filter.”
- “Correct U2 pin 5 to `EN` and regenerate the affected connection.”

After revision, previous validation, simulation, and placement results may be stale. Re-run them.

## See also

- [Fix or Create a Component](component-generator.md)
- [Placement and Routing Assistant](auto-placer-router.md)
- [Simulation Workbench](../simulation/index.md)
- [ERC](../schematic/erc.md)
