AI Copilot

Missing parts, generated

No symbol or footprint? Draft both from the datasheet, or pull the part from LCSC.

Add LCSC C2040 to the library

Who does what

The top lane is you; the bottom lane is WireFrame Copilot.

You
01

Pick a way forward

CreateImport/fix

Create looks in WireFrame's published library first; Import takes a KiCad or Altium file; /fix asks the Copilot to build it.

04

Apply or cancel

ApplyAttach PDF

Nothing changes until you press Apply. Not right? Attach the manufacturer's datasheet and ask again.

06

Inspect & confirm

PreviewsConfirm

Compare it with the datasheet of the exact part number, then confirm. One confirmation covers every row sharing the pair.

WireFrame Copilot
02

Find the evidence

Your PDFIndexWeb

The datasheet you attach, then the index, then the web — downloaded and read by WireFrame itself.

03

Propose the part

Pin tableLandValidated

Pin table, package and land pattern, validated against the evidence and the package rules before you see them.

05

Draw it live

SymbolFootprintRe-check

Written to the project's library and drawn in the editor while you watch; the card is checked again.

BOM cards for parts the library does not have: a footprint that is not loaded (Manage, Import) and an ADC with no symbol (Create, Import, or ask for it with /fix and its datasheet)

The part you need is rarely in the library you have. The Copilot drafts a symbol and a land pattern from the datasheet, or fetches the part from LCSC by its part number, and shows you the result before it is used anywhere.

What it does

From the datasheet

Pin table and package dimensions become a symbol and a footprint draft.

From LCSC

Give an LCSC part number (C-number) and the part is imported with its symbol and footprint.

You confirm

Drafts stay drafts until you open them in the editors and confirm.

Stored with the project

Confirmed parts go to the project's own KiCad-format library.

Three ways forward from one card

In the review, a part your libraries do not have shows as a card — Not in Pool, a pin and pad count that disagree, or a pair waiting to be inspected. Create searches WireFrame's published library for the exact part first, where most common parts already ship a checked symbol, footprint and 3D model, and opens the Symbol Library Editor only when it is not there. Import adds a KiCad or Altium library you already have. /fix asks the Copilot to build or repair it, and the card shows the exact form to type.

Built from evidence, shown before it is saved

For a part it builds, WireFrame finds the datasheet — yours, the index, or the web, downloaded and read by WireFrame itself — and the Copilot proposes the pin table, the package and the land pattern. WireFrame validates that plan against the evidence and its package rules before you see it, with Apply, Attach datasheet and Cancel. Apply writes the symbol and footprint to the project library and replays the drawing in the editor, so you watch the pins and pads being placed.

Every missing part at once

When several rows have nothing to bind to, ask for it in plain words — "fix the parts that cannot be used yet" — and the Copilot runs AI Verify & Fix over all of them, building a symbol and footprint for each and checking the findings again against what it produced. Each result is still a starting point: compare it with the manufacturer's pin table, package drawing and recommended land pattern, then confirm it.

The details

Card statesNot in Pool · pin/pad count mismatch · inspect both previews, then confirm
ActionsCreate (published library first) · Import (KiCad, Altium) · /fix <refdes> …
Also fromLCSC, by the exact part number
Written toThe project's own library, lib_<project>
Trusted afterA person confirms it — one confirmation covers rows sharing the same pair

How to start

  1. Ask the Copilot for the part, or open it from a rejected BOM row.
  2. Review the draft in the Symbol and Footprint editors.
  3. Confirm, and the part is placed.

Questions

Can I use a generated part straight away?

Treat it as a draft until it is checked against the datasheet of the exact part number: pin numbers and names, pitch, pad size, pin 1 and polarity. A repaired or automatically bound part is not trusted until a person confirms it.

Where do the new parts go?

Into the project's own lib_<project> folder, so save the project first. A part reaches other projects only after a person confirms it.

Do I need a paid plan?

It comes with the Max and Pro plans, on the plan's monthly AI credit. The Free plan has the design tools and no AI Copilot.