Design tool

3D viewer

See the assembled board in real time, with STEP and OBJ component models.

The h730duino board in the WireFrame EDA 3D viewer

Open the 3D view at any point in layout to check component heights, connector positions and the bottom side. Parts with a STEP or OBJ model are drawn from it; parts without one are drawn as coloured blocks so nothing goes missing. The development builds render it physically — true STEP colours, metal that reflects, a chosen mask colour and surface finish — and keep it beside the sheet and the board, with a part picked in one highlighted in the others.

What it does

Orbit, pan, zoom, pick

Right-drag to orbit, middle-drag to pan, scroll to zoom; click a part to probe it on the board and the sheet.

STEP and OBJ models

Assign a 3D model to a footprint once and it appears on every board that uses it.

Both sides

Orbit below the board to inspect bottom-side parts.

Clearance by eye

Zoom into tall parts — connectors, relays, capacitors — to see that they fit.

Real models, real geometry

The viewer is built on the same OpenCascade kernel that reads the STEP files, so a component model is actual solid geometry rather than a decorative mesh. That is what makes the measurements meaningful: a connector's shell is where the connector's shell is, and a height check against an enclosure is arithmetic rather than an estimate.

Checking the things that are expensive to get wrong

Three mistakes account for most mechanical rework: a part too tall for the case, a connector whose opening does not line up with the panel cut, and two boards in a stack whose components collide. All three are visible here before anything is ordered — and with Board Fit, load the enclosure as STEP or STL, drop the board into it, and look.

A part with no model is a block, not a hole

Open-hardware projects frequently ship without 3D models for half the BOM. Rather than drawing nothing, WireFrame renders those parts as blocks sized from the footprint's courtyard and its height property. That keeps a clearance check honest — a missing model should not read as clear space — and the blocks are plainly distinguishable from real models.

The details

Model formatsSTEP, VRML (.wrl), STL and OBJ part models
RenderingReal-time OpenGL 3.3: the board with its outer copper, a chosen soldermask colour and finish, and silkscreen drawn from the actual layers
ViewsOrbit, pan and zoom; reset the view or frame a single part
EnclosuresBoard Fit: load a case as STEP, IGES, STL, 3MF or OBJ and fit the board inside it
ExportA STEP of the board with its parts as height blocks, from Board Fit

How to start

  1. Open a board and choose View › 3D Viewer.
  2. Orbit around the board; zoom into tall parts.
  3. Assign missing models from the footprint's properties.

Questions

Where do the component models come from?

From your libraries — a footprint can carry a model path — and from WireFrame's verified library. KiCad's own 3D models work as they are.

Can I give the mechanical engineer the board?

Yes. Board Fit exports the board as STEP, each part a block of its real height, and it opens in any mechanical CAD package.

Does it need a dedicated graphics card?

No. It is OpenGL 3.3 and runs on integrated graphics, including Apple Silicon's.