Every tool, one page each
What WireFrame EDA does, how to start with it, and which tools sit next to it. "In development" means not in a release yet.
A board by hand: what you do, what WireFrame checks
With the tools in the version you can download today. The AI Copilot's own run is on the AI page.
Draw the schematic
Place parts from your libraries, wire them and split the design across sheets — or open a KiCad project.
Lay out the board
Update the schematic to the PCB, place the footprints, route against the net classes and pour the planes.
Fix & check again
Click a result to jump to it, fix it on the canvas and run the check again until the list is clean.
Order the board
Upload what was checked rather than what was intended, to the board house of your choice.
Check the connections
The net graph is built as you draw. The ERC finds floating inputs, outputs that fight, unpowered pins and duplicate names.
Check the copper
Clearances, widths and what the fab can make, each result one click from its place on the board; every part in 3D at its height.
Write & audit the outputs
Gerber, drill, BOM and pick-and-place, read back by WireFrame's own Gerber parser before they leave.
Design tools
Schematic capture
Multi-sheet schematics with live connectivity and an Electrical Rules Check.
Learn morePCB layout
Multi-layer boards: routing, vias, zones and planes, net classes and design rules.
Learn moreHigh-speed routing & length tuning
Differential pairs routed as pairs, meanders to match a bus, and a live length gauge.
Learn moreHigh-Speed Workbench (SI, PI, EMI)
Impedance, pairs, return paths, crosstalk, interfaces, power and EMI — computed on your routed copper, with the evidence.
Learn morePower Analyzer — DC IR drop
The voltage each chip really sees, where the drop is lost, and what to change.
Learn moreDRC & DFM checks
Design-rule and manufacturability checks that jump straight to each problem.
Learn more3D viewer
See the assembled board in real time, with STEP and OBJ component models.
Learn moreSPICE simulation
Transient, AC, DC sweep and operating point, with a waveform viewer and checks that run after every simulation.
Learn moreKiCad & Altium libraries
Use KiCad libraries as they are, import Altium libraries, open KiCad projects.
Learn moreLibrary Manager & Library Workspace
Preview every library in one window; edit one in a workspace beside the Copilot.
Learn moreFabrication export
Gerber RS-274X, Excellon drill, BOM and PDF — checked in the built-in Gerber viewer.
Learn moreMulti-board products
One project, a PCB per board, one assembly that checks every connection between them pin by pin.
Learn moreSchematic, board and 3D side by side
The three views at once — a part picked in one is highlighted in the other two.
Learn moreImport & export: KiCad, Altium, EasyEDA
Open KiCad and Altium projects; write KiCad, Altium Designer and EasyEDA projects — and get the same design back.
Learn more TOOLMCP server — your own agent, on your board
Claude, Codex or Cursor can place, route, pour, check and solve power on the board open in WireFrame.
Learn more/board
Board from its parts or its case
Sizes proposed from the BOM, or the outline, holes and keepouts cut from your enclosure.
Learn moreAI Copilot
chat
Requirement → schematic
Describe the board; get a real BOM, a netlist and editable schematic sheets.
Learn more/findings
Library check with reasons
Every BOM row is matched to a symbol and footprint — and a rejection names its rule.
Learn more/contract U1
Datasheet evidence
The model may suggest a datasheet URL; WireFrame downloads and reads the PDF itself.
Learn morechat
Missing parts, generated
No symbol or footprint? Draft both from the datasheet, or pull the part from LCSC.
Learn more/fix U2 the package is SOT-23-3, see the datasheet
/fix — repair one part
Say what is wrong with a part; get a proposed correction that changes nothing until you accept.
Learn morechat
SPICE in the loop
Simulate the drafted design right away, so a supply or filter that fails is caught before layout.
Learn more/review
Board review
/review explains the open board; /findings lists what the checks found — without calling a model.
Learn morechat
Project memory
Decisions you make are remembered for the project, so the Copilot does not undo them.
Learn more/missing
A library the Copilot can trust
Parts are matched by code, checked by rule and reused once a person confirms them.
Learn more/findings
Copilot commands, panel by panel
Type / and the Copilot offers the commands of the panel in front — schematic, PCB, simulation or library.
Learn more/layout route
Live AI layout
/layout places, pours planes, drops vias and routes while you watch — and applies nothing until you say so.
Learn more