Requirement → schematic
Describe the board; get a real BOM, a netlist and editable schematic sheets.
An ESP32-C3 sensor board, USB-C power, 3.3 V LDO and an I²C header
Write what the board must do, in English or Vietnamese. The Copilot researches the parts, writes a BOM and a netlist from real part numbers, and draws the schematic as normal WireFrame sheets. The plan is a file next to your project, so you can read it, diff it and change it before anything is drawn.
What it does
Real parts
Every BOM row is a real part with a package and a pin count, not a generic placeholder.
A plan you can review
The BOM and netlist are a draft you approve before the sheets are drawn.
Normal sheets
The result is ordinary schematic sheets — edit them like anything you drew yourself.
Checked on arrival
Each part goes through the library check and the datasheet check.
It asks before it assumes
A request like "make a power supply" leaves the decisions that matter unmade, and a model that fills them in silently produces a design nobody asked for. So the Copilot researches the request first, shows what it found, and then asks the open questions one at a time, each with a suggested answer and room for your own. Choosing "Use all suggestions & continue" is allowed for exploratory work, but every suggestion it fills in stays listed as an explicit assumption, so you can see later which values you decided and which were decided for you.
A plan you review before anything is drawn
What comes back is a draft, not a sheet: a BOM of real part numbers, a connection plan with every net and pin, and the circuit grouped into functional blocks — power, protection, control, interfaces. Each BOM row is bound to a symbol and footprint by the library check, so a row is either a part you can place or a card that says why it is not. The Netlist Check then looks for missing pins, pin and pad counts that disagree, unconnected power and single-node nets before a single wire exists.
Drawn and marked, not all or nothing
A draft is rarely free of findings, and refusing to draw anything while one pin floats helps nobody. Penalty, the reviewer, separates whether the design is right from whether the drawing would be right. Parts with a finding the sheet can show honestly are drawn and marked — red for critical, amber for a warning, with the finding's number. A block whose core part cannot be drawn yet waits, and the card names the part, the reason and the command that clears it.
Your edits become the plan
Once the sheets exist you edit them like any schematic. Change a value, swap a footprint, delete a part or move a pin to another net, and the change is carried back into the BOM plan and netlist, reported in the chat, and checked again. The repair agents are told what you changed and are instructed never to undo it. Revisions are best asked one bounded change at a time: "replace the regulator with a 1 A part in SOIC-8" redraws the blocks it touches and leaves the rest of the sheet alone.
The details
| Input | A written request — voltages, loads, interfaces, size, preferred or prohibited parts — plus answers to the clarifying questions |
|---|---|
| Output | A BOM of real parts, a netlist, functional blocks, then ordinary schematic sheets |
| Review window | BOM Components, Connections Netlist, Blocks, Board Fit, System, Netlist Check, Simulate & Verify, Design Analysis, Local Pool Settings |
| Placement verdicts | Ready to place · Place with issues · Partly placeable · Blocked |
| Resume a stopped run | /retry-research, /retry-bom, /retry-bom-all, /retry-netlist |
| Plans | Max and Pro, on the plan's AI credit |
How to start
- Open the AI Copilot panel and describe the circuit.
- Read the proposed BOM and netlist; ask for changes.
- Accept, and the sheets are drawn into the project.
Questions
Does it make up part numbers?
It proposes parts, but whether a part binds is decided by deterministic library checks, and before it names a part the Copilot confirms the part exists in the libraries on your machine. A part that is not there is shown as a card that needs a library decision, not drawn as if it were.
What happens if the run stops halfway?
Resume it rather than start again: /retry-bom chooses only the unresolved BOM rows again from the retained research, and /retry-netlist wires the saved BOM again.
Do I need a paid plan?
It comes with the Max and Pro plans, on the plan's monthly AI credit. The Free plan has the design tools and no AI Copilot.