Design tool

Board from its parts or its case

Sizes proposed from the BOM, or the outline, holes and keepouts cut from your enclosure.

/board

Who does what

The top lane is you; the bottom lane is WireFrame Copilot.

You
01

Say what is fixed

The caseNothing yetLimits

The mechanics, nothing yet, or only a largest size — and the copper layers, chosen before any size.

03

Pick & mark

Use a sizeLidHoles

Use a size, or mark the lid so the display and keys sit under its openings; set the hole the screw passes through.

05

Update the PCB

OutlineBoard cut

The outline, holes and keepouts arrive on the board, and the board itself sits on the root sheet as a part.

WireFrame Copilot
02

Propose or cut the board

SizesFrom the case

Nothing fixed: Compact, Edge row and Roomy, each grown until it fits. A case: the board cut from the surface it sits on.

04

Check the fit

AreaHeight

Each part's courtyard against the board and its height against the case; an unknown height is said, never guessed.

06

Send it to the case maker

STEPUnknown heights

The board and its parts as boxes of their stated heights; a part with no height goes in as a red marker.

Board Fit: the board, what it has to hold, and the case it has to sit in

Board Fit starts by asking what is fixed already. If nothing is, it proposes board sizes from the parts list — compact, edge row or roomy — and checks each one fits. If the case exists, open it as STEP, STL, 3MF or OBJ: WireFrame finds where the board sits and cuts the outline, mounting holes and keepouts from it, and pins the display, keys and USB to their openings.

What it does

Sized from the BOM

Every proposal is checked against the parts' real footprints and heights.

Cut from the case

Outline, mounting holes and keepouts come from the model, at the seating plane.

Openings found

A display, keys and a USB port are pinned to the openings in the lid and walls.

STEP back to the case maker

Export the board and its parts as STEP for the mechanical design.

Drawing of an enclosure opened in an exploded view: the tray with its screw bosses, the board above it lit in cyan with its USB port lined up with the opening in the wall, and the lid with its display window

It starts with what is fixed already

The Board Fit tab asks one question, kept with the project: is the shape set by the mechanics, by nothing yet, or only by limits? Mechanics means the parts must fit a case, a frame, a standard board or a drawing. Nothing yet means the circuit decides and the case is made round it. Only limits sizes the board from the BOM inside a largest size. The copper layer count is chosen here too, before any size, because it changes how much room the parts need.

Sizes grown until they fit

With nothing mechanical to follow, it offers Compact, the least square; Edge row, long enough for every part that must stand at one edge; and Roomy, at 4:3 — each grown until the fit check agrees, with its area, aspect, verdict and share of the edge. The fit check weighs each part's courtyard against the board and its height against the case. Both sides is off by default: a design that only fits on both faces is a decision to make on purpose.

From the case, and back to it

Add the case as STEP, IGES, STL, 3MF or OBJ, mark which file is the lid, and cut the board from an upward-facing surface of the model; a model that already contains boards can give the whole stack. Export for the case writes the board and every part as its courtyard box at its stated height — and a part with no known height goes in as a red HEIGHT UNKNOWN marker rather than a guess.

The details

First questionThe mechanics · nothing yet · only limits
Copper layers1, 2, 4 or 6, chosen before the size
Proposed sizesCompact · Edge row · Roomy (4:3)
3D inputSTEP, IGES, STL, 3MF, OBJ — case, lid, frame or board
Standard boardsRaspberry Pi HAT and µHAT · Arduino UNO shield · FPV 30.5 / 25.5 / 20 / 16 mm
ExportSTEP for the mechanical CAD; the board as a BOARD CUT part on the schematic

How to start

  1. Open the Copilot's Design Plan and choose the Board Fit tab.
  2. Say what is fixed already: the mechanics, nothing yet, or only limits.
  3. Pick a proposed size, or add the case's 3D files and use the plane the board sits on.
  4. Update the PCB: the outline arrives on the board.

Questions

My STL board came out 25 times too small.

STL and OBJ carry no unit and are read as millimetres; set the file's unit to inches or centimetres on the tab.

Why are the screw holes too small?

A hole left at zero takes the bore under it, which in a plastic boss is usually the pilot hole the screw bites into. Set the hole the screw passes through the board.

Is a design without an enclosure a problem?

No. Nothing on the tab is a fault until you give the board a case or a second board.