Sample board KLP4e MCU datalogger — reading a finished schematic, and what ERC says about it

The ATmega328P datalogger from "KiCad Like a Pro" (4th ed.), imported into WireFrame EDA — its two schematic sheets, why a working design still shows 18 ERC errors, and the small two-layer board.

Sample board KLP4e MCU datalogger — reading a finished schematic, and what ERC says about it

The MCU datalogger from Peter Dalmaris's KiCad Like a Pro (4th edition) is a teaching board, and a well-drawn one: an ATmega328P with a 16 MHz crystal, a DS1337 real-time clock with its 32.768 kHz crystal and backup battery, two 24LC1025 I²C EEPROMs, a status LED and the connectors — on two schematic sheets and a 52 × 33 mm two-layer board.

It is the board the WireFrame user guide uses for its schematic chapters, because every block on its main sheet is drawn and labelled like a textbook figure.

The main sheet#

The author draws each function inside its own titled rectangle — Real time clock, MCU, EEPROM, Connectors, Mounting — and carries power and the I²C bus between them with net labels (Vcc, SDA, SCL) instead of long wires. The connectors live on a second sheet.

The KLP4e main sheet in WireFrame EDA — five titled blocks joined by net labels

For members

Keep reading — it’s free

Sign in or create a WireFrame account to read the rest of this post and every guide on the blog.

  • The rest of this post — about 2 min of reading
  • The same account signs in the WireFrame desktop app
  • Free design tools, no time limit

Sign in to WireFrame

One account for the desktop app and this site.

or with email
Forgot password?

Related posts

KiCad to WireFrame EDA and back: 72/72 round trips identical

Open a KiCad project in WireFrame EDA, work on it and export it back to KiCad: what comes across, what to check, and how the round trip was measured.

Sample board One-Air-Max — a 4-layer ESP32-C6 air-quality sensor with a PCB antenna, in WireFrame EDA

KiCad's One-Air-Max demo (ESP32-C6, solar and battery charging, buck converter, sensor front-end) imported into WireFrame EDA — its four-layer stackup and the keepout that keeps copper away from the antenna.

Sample board Jetson Nano baseboard — an 8-layer SO-DIMM carrier, opened in WireFrame EDA

Antmicro's open-source baseboard for the Jetson Nano and Xavier NX modules, imported from KiCad into WireFrame EDA — what is on its eight layers and what WireFrame measures on it.